| Mga pangunahing parameter | Swdh89s. | SWDH102S. | |
| Mga parameter ng operasyon | |||
| Hanay ng diameter ng butas | mm | 64-115. | 76-127. |
| Drill Pipe Specifications. | T38, T45, T51. | T45, T51. | |
| Drill pipe length. | mm | 3660 | 3660 |
| DrillingDepth. | m | 24 | 24 |
| Hydrau lic rock drill rig. | |||
| Impact Power. | KW. | 14 | 21 |
| Slewingtorque. | Nm | 700 | 1000 |
| Slewingspeed | Nm | 0-180. | 0-150. |
| Engine | |||
| Modelo | Catc7.1. | QSC8.3. | |
| Kapangyarihan | kw / rpm. | 168/2200. | 179/2200. |
| Fuel tank. | L | 450 | 450 |
| Air Com Pressor. | |||
| Paglabas ng presyon | Bar. | 8 | 10 |
| Pag-aalis | m3 / min | 8 | 10 |
| Boom. | |||
| Pattern | Foldingboom. | Folding boom. | |
| Lifting angle. | 0 | +70 ~-10. | +70 ~-10. |
| Foldingangle. | 0 | 65-165. | 65-165. |
| Swing angle. | 0 | +20 ~-30. | +20 ~-30. |
| Pagpapaandar | |||
| Kabuuang haba ng propulsion girder | mm | 7300 | 7300 |
| Bayad na paglalakbay | mm | 1200 | 1200 |
| Forward inclination. | 0 | 140 | 140 |
| Rollback. | 0 | _20 ~90. | 2.~90. |
| Pinakamataas na rate ng pagtagos | MS | 0.8 | 0.8 |
| Pinakamataas na pagpapaandar | kn | 25 | 25 |
| Paglalakbay sa kakayahan | |||
| Pinakamataas na bilis ng paglalakbay | km / h. | 4.2 | 4.2 |
| Pinakamataas na puwersa ng traksyon | kn | 100 | 100 |
| Gradeability | 0 | 25 ° | 25 ° |
| Swing angle ofcrawlerframe. | 0 | -7- + 12. | -7- + 12. |
| Lupa clearance ng tsasis | mm | 400 | 400 |
| Pangkalahatang sukat | |||
| Timbang | yaon | 15000 | 15000 |
| Lxwxh (nagtatrabaho) | m | 9.2x2.6x8.6. | 9.2x2.6x8.6. |
| Lxwxh (transportasyon) | m | 11.2x2.6x3.5. | L2x2.6x3.5. |
Aerial work platform Crane Pagbabarena Rig. Excavator. Loader Mobile Crushing Station. Underground engineering equipment.